Two cooling circuits
Independent temperature control supports the fibre laser source and its optical components from one integrated unit.
TEYU S&A DUAL-CIRCUIT COOLING
Fibre Laser Water Chillers
Purpose-built cooling systems for fibre laser sources and optics from 3 kW to 20 kW. Compare the four CWFL models, then ask Plasquip to confirm the correct electrical and cooling configuration for your laser.
CHOOSE BY LASER POWER
Four fibre-laser chiller models
Each CWFL model uses separate cooling circuits for the laser source and optical components, with intelligent temperature control, integrated alarms and RS-485 Modbus communication.
UP TO 3 KW FIBRE LASER
View model details →
CWFL-3000
8.6 kW nominal cooling capacity with ±0.5°C temperature stability.
Contact us for pricing
UP TO 6 KW FIBRE LASER
View model details →
CWFL-6000
16.3 kW nominal cooling capacity with ±1°C temperature stability.
Contact us for pricing
UP TO 12 KW FIBRE LASER
View model details →
CWFL-12000
35 kW nominal cooling capacity and a 170 L reservoir for high-power systems.
Contact us for pricing
UP TO 20 KW FIBRE LASER
View model details →
CWFL-20000
45 kW nominal cooling capacity for demanding high-power fibre laser installations.
Contact us for pricing
AT-A-GLANCE COMPARISON
Compare the CWFL range
The final model must be checked against the laser manufacturer’s heat load, flow, pressure, ambient conditions and electrical requirements.
| Model | Laser power | Cooling capacity | Temperature stability | Tank | Dimensions |
|---|---|---|---|---|---|
| CWFL-3000 | Up to 3 kW | 8.6 kW | ±0.5°C | 22 L | 750 × 560 × 1,020 mm |
| CWFL-6000 | Up to 6 kW | 16.3 kW | ±1°C | 70 L | 1,050 × 710 × 1,360 mm |
| CWFL-12000 | Up to 12 kW | 35 kW | ±1°C | 170 L | 1,450 × 800 × 1,320 mm |
| CWFL-20000 | Up to 20 kW | 45 kW | ±1.5°C | 170 L | 1,410 × 800 × 1,320 mm |
SYSTEM SELECTION
Specify the complete cooling requirement
Laser output is only the starting point. Plasquip will confirm the correct model using the laser manufacturer’s cooling requirements, installation environment, electrical supply and required communication interface.
Installation support
We can review flow, pressure, water quality, ventilation clearance, ambient temperature and connection requirements before supply.
Need a chiller matched to your fibre laser?
Send us the laser brand, model and rated power, or call 1300 722 868.