This teflon cloth for the PS-800FI sealer is a direct replacement consumable designed to maintain clean, consistent seals on PS-800FI, PS-805FI, PS-805FDV, and PS-800AI impulse sealer models. Measuring 80 × 30mm, it fits precisely over the heating element on the seal bar of these machines, providing a non-stick barrier between the element and the packaging film during every sealing cycle.
In an impulse sealer, the heating element delivers a brief, controlled burst of heat to melt and bond packaging film. Without a teflon cloth in place, the plastic film can stick directly to the element wire, leading to tearing, uneven seals, or accelerated wear on the element itself. The 80 × 30mm PS-800FI sealer teflon cloth sits between the element and the film, allowing sealed material to release cleanly after each cycle while shielding the element from direct contact with molten plastic.
Over time the cloth discolours, develops small holes where the element runs, or begins to show surface scorching. Any of these signs indicate it is time for a straightforward replacement. Replacing the cloth promptly when wear appears is the quickest way to restore consistent seal quality and avoid interruptions to your packaging line.
This replacement teflon cloth for the PS-800FI sealer suits any business or facility that relies on PS-800FI, PS-805FI, PS-805FDV, or PS-800AI impulse sealers as part of a regular packaging process. Common settings include food packaging operations, light industrial bagging lines, medical and laboratory supply packaging, and retail poly-bag sealing. Because it is one of the more frequently replaced consumable parts in routine sealer maintenance, businesses that run their sealers daily will find it practical to keep a spare on hand.
If you are carrying out broader maintenance on a compatible impulse sealer, the Repair Kit for the PS-605FI/AI Sealer is also available, covering all key consumable components needed for a full element service. Keeping a spare 80mm teflon cloth for PS-800FI models alongside a suitable repair kit in your maintenance supplies helps reduce downtime whenever your sealer requires attention.
This teflon cloth for the PS-800FI sealer is a direct replacement consumable designed to maintain clean, consistent seals on PS-800FI, PS-805FI, PS-805FDV, and PS-800AI impulse sealer models. Measuring 80 × 30mm, it fits precisely over the heating element on the seal bar of these machines, providing a non-stick barrier between the element and the packaging film during every sealing cycle.
In an impulse sealer, the heating element delivers a brief, controlled burst of heat to melt and bond packaging film. Without a teflon cloth in place, the plastic film can stick directly to the element wire, leading to tearing, uneven seals, or accelerated wear on the element itself. The 80 × 30mm PS-800FI sealer teflon cloth sits between the element and the film, allowing sealed material to release cleanly after each cycle while shielding the element from direct contact with molten plastic.
Over time the cloth discolours, develops small holes where the element runs, or begins to show surface scorching. Any of these signs indicate it is time for a straightforward replacement. Replacing the cloth promptly when wear appears is the quickest way to restore consistent seal quality and avoid interruptions to your packaging line.
This replacement teflon cloth for the PS-800FI sealer suits any business or facility that relies on PS-800FI, PS-805FI, PS-805FDV, or PS-800AI impulse sealers as part of a regular packaging process. Common settings include food packaging operations, light industrial bagging lines, medical and laboratory supply packaging, and retail poly-bag sealing. Because it is one of the more frequently replaced consumable parts in routine sealer maintenance, businesses that run their sealers daily will find it practical to keep a spare on hand.
If you are carrying out broader maintenance on a compatible impulse sealer, the Repair Kit for the PS-605FI/AI Sealer is also available, covering all key consumable components needed for a full element service. Keeping a spare 80mm teflon cloth for PS-800FI models alongside a suitable repair kit in your maintenance supplies helps reduce downtime whenever your sealer requires attention.
Note: All products exclude GST where applicable at the current rate.
PLASQUIP has teamed up with a highly experienced Finance Consultant, Christos Kritikos from FINLEASE, to be able to offer our highly valued customers quick and efficient access to Equipment Finance for their purchase of Capital Plant and Equipment.
Ask Christos TODAY how to secure hassle-free finance for your equipment purchase – he can be contacted on his email below:
Landline: (02) 8404 2000
Mobile: 0448 005 890
Email: CKritikos@finlease.com.au
OR you can ask for Christos in the “comments” area in the FINLEASE Contact us page.
Delivery:
It is your obligation to enter the correct delivery address details at time of ordering. If you enter the wrong address, we are not obliged to re-send the order to the correct address at our expense. It is the responsibility of you the customer to inform us if an order does not arrive in a timely manner allowing for freight carriers normal delivery time frames to your address. All orders for product that is in stock is dispatched within two working days. If an order does not arrive please inform us. Once we learn an order has not arrived within the approximate delivery time frame, we will lodge enquiries with the freight provider to search for the order. We will not be held liable for any loss or damage resulting from late delivery, but will seek compensation on your behalf, for orders which do not arrive at all.
Without limiting the operation of any other Terms and Conditions herein, you agree that late delivery by a freight provider or Plasquip Sales does not constitute a failure of our agreement and does not entitle you to cancellation of an order.
Cancellations:
If you contact us before the order is shipped, we can refund you immediately. However, if the order has already been shipped, you will have to return the consignment to us at the below address. We (Plasquip Sales) reserve the right to cancel any order for any reason whatsoever. If you have already paid for an item ordered and we choose to cancel, your money will be refunded in full.
Refunds:
If you receive a product that you believe is significantly not as described, please contact us. After discussing the issue with us we will at our discretion refund your money after the return of the product/s. It will be your responsibility to return the item/s back to our address (at your cost, unless we are at, and have acknowledged, fault) in their original condition before a refund will be issued. Any item that we intentionally sell damaged, will be clearly marked as such.
Out of Stock:
Although we keep stock quantities of most products, on some occasions we run out of some products, which on average will delay an order, if this is the case, we will inform you via email of the estimated delivery time and give you the option to proceed with the order or cancel the order and receive a full refund.
Use our finance calculator from QPF Finance and Insurance to explore flexible payment options that work for you.
Procuret offers no-doc instant quote payment plan style financing for Plasquip products. Click the link below to decide the term 6 to 36 months you would like to pay over and receive an instant quote. Full application takes 2 minutes, approval within 15 minutes.
Please Note: In the 'Invoice ID' Field, Please Input 'Quote'
If you have any questions reach out to the customer success team:02 8866 5399/hello@procuret.com
Note: All products exclude GST where applicable at the current rate.