The Pacmasta 300mm shrink pack sealer with heat gun is a complete L-Bar sealing system that gives businesses everything they need to begin shrink wrapping straight away. The unit combines the sealer, heat gun, and film dispenser rack with bearing rollers in a single package, removing the need to source a separate heat source or additional accessories before getting started.
This unit operates as a full L-Bar shrink wrap system. The L-Bar sealing arm makes two seals simultaneously - one horizontal and one vertical - cutting and sealing the film around the product in a single downward motion. Once the package is sealed, the included heat gun applies heat to cause the film to shrink tightly around the product, producing a neat, secure finish. A built-in timer controls the seal cycle to maintain consistent results and limit unnecessary energy use. Seal time is adjustable between one and four seconds, giving operators control when working with different film thicknesses or product sizes.
The following features are included as standard with this unit:
The 300mm shrink pack sealer with heat gun suits a wide range of industries and packaging tasks. Retail businesses commonly use L-Bar shrink systems to package boxed goods, gift sets, books, software, DVDs, and promotional bundles. In industrial and warehouse environments, shrink wrapping protects products from dust, moisture, and handling damage during storage and transit. Small to medium production lines benefit from the one-step design, which reduces the time spent moving products between a sealer and a separate heat source. The 300mm seal width makes this unit particularly well suited to smaller and mid-sized products rather than large palletised loads.
This system is a practical choice for businesses with moderate packaging volumes that do not yet require a fully automated shrink tunnel line. The included film dispenser rack with bearing rollers means operators have everything on hand to begin packaging immediately after setup. CE approval indicates the unit has been assessed against relevant European safety standards, which is an important consideration for workplaces with formal health and safety requirements.
If your operation also requires a flat-bag heat sealing solution alongside this 300mm shrink pack sealer with heat gun, the Pacmasta Constant Heat Sealer - Foot Operated 300mm x 10mm Seal is a complementary option available through the same supply channel.
The Pacmasta 300mm shrink pack sealer with heat gun is a complete L-Bar sealing system that gives businesses everything they need to begin shrink wrapping straight away. The unit combines the sealer, heat gun, and film dispenser rack with bearing rollers in a single package, removing the need to source a separate heat source or additional accessories before getting started.
This unit operates as a full L-Bar shrink wrap system. The L-Bar sealing arm makes two seals simultaneously - one horizontal and one vertical - cutting and sealing the film around the product in a single downward motion. Once the package is sealed, the included heat gun applies heat to cause the film to shrink tightly around the product, producing a neat, secure finish. A built-in timer controls the seal cycle to maintain consistent results and limit unnecessary energy use. Seal time is adjustable between one and four seconds, giving operators control when working with different film thicknesses or product sizes.
The following features are included as standard with this unit:
The 300mm shrink pack sealer with heat gun suits a wide range of industries and packaging tasks. Retail businesses commonly use L-Bar shrink systems to package boxed goods, gift sets, books, software, DVDs, and promotional bundles. In industrial and warehouse environments, shrink wrapping protects products from dust, moisture, and handling damage during storage and transit. Small to medium production lines benefit from the one-step design, which reduces the time spent moving products between a sealer and a separate heat source. The 300mm seal width makes this unit particularly well suited to smaller and mid-sized products rather than large palletised loads.
This system is a practical choice for businesses with moderate packaging volumes that do not yet require a fully automated shrink tunnel line. The included film dispenser rack with bearing rollers means operators have everything on hand to begin packaging immediately after setup. CE approval indicates the unit has been assessed against relevant European safety standards, which is an important consideration for workplaces with formal health and safety requirements.
If your operation also requires a flat-bag heat sealing solution alongside this 300mm shrink pack sealer with heat gun, the Pacmasta Constant Heat Sealer - Foot Operated 300mm x 10mm Seal is a complementary option available through the same supply channel.
Note: All products exclude GST where applicable at the current rate.
PLASQUIP has teamed up with a highly experienced Finance Consultant, Christos Kritikos from FINLEASE, to be able to offer our highly valued customers quick and efficient access to Equipment Finance for their purchase of Capital Plant and Equipment.
Ask Christos TODAY how to secure hassle-free finance for your equipment purchase – he can be contacted on his email below:
Landline: (02) 8404 2000
Mobile: 0448 005 890
Email: CKritikos@finlease.com.au
OR you can ask for Christos in the “comments” area in the FINLEASE Contact us page.
Delivery:
It is your obligation to enter the correct delivery address details at time of ordering. If you enter the wrong address, we are not obliged to re-send the order to the correct address at our expense. It is the responsibility of you the customer to inform us if an order does not arrive in a timely manner allowing for freight carriers normal delivery time frames to your address. All orders for product that is in stock is dispatched within two working days. If an order does not arrive please inform us. Once we learn an order has not arrived within the approximate delivery time frame, we will lodge enquiries with the freight provider to search for the order. We will not be held liable for any loss or damage resulting from late delivery, but will seek compensation on your behalf, for orders which do not arrive at all.
Without limiting the operation of any other Terms and Conditions herein, you agree that late delivery by a freight provider or Plasquip Sales does not constitute a failure of our agreement and does not entitle you to cancellation of an order.
Cancellations:
If you contact us before the order is shipped, we can refund you immediately. However, if the order has already been shipped, you will have to return the consignment to us at the below address. We (Plasquip Sales) reserve the right to cancel any order for any reason whatsoever. If you have already paid for an item ordered and we choose to cancel, your money will be refunded in full.
Refunds:
If you receive a product that you believe is significantly not as described, please contact us. After discussing the issue with us we will at our discretion refund your money after the return of the product/s. It will be your responsibility to return the item/s back to our address (at your cost, unless we are at, and have acknowledged, fault) in their original condition before a refund will be issued. Any item that we intentionally sell damaged, will be clearly marked as such.
Out of Stock:
Although we keep stock quantities of most products, on some occasions we run out of some products, which on average will delay an order, if this is the case, we will inform you via email of the estimated delivery time and give you the option to proceed with the order or cancel the order and receive a full refund.
Use our finance calculator from QPF Finance and Insurance to explore flexible payment options that work for you.
Procuret offers no-doc instant quote payment plan style financing for Plasquip products. Click the link below to decide the term 6 to 36 months you would like to pay over and receive an instant quote. Full application takes 2 minutes, approval within 15 minutes.
Please Note: In the 'Invoice ID' Field, Please Input 'Quote'
If you have any questions reach out to the customer success team:02 8866 5399/hello@procuret.com
Note: All products exclude GST where applicable at the current rate.