The 450mm foot sealer 5mm seal cutter from Pacmasta is a hands-free impulse sealing machine designed for businesses that need clean, repeatable seals on plastic tube bags. With a 450mm sealing width and a foot-operated pedal that keeps both hands free during the sealing cycle, this unit is built for higher-volume packing environments where consistency and workflow efficiency matter.
This machine uses impulse heat technology, meaning the heating element activates only when the sealing cycle is triggered rather than staying on continuously. This reduces energy use and lowers the risk of accidental burns when the machine is idle between batches. The operator triggers each sealing cycle with a foot pedal, leaving both hands free to hold, position, and steady the bag or product throughout the process.
The unit features an obstruction-free throat that allows roll-dispensed material to feed through cleanly without catching or bunching. This makes it suitable for operations working directly from a roll of flat or tube plastic film, rather than relying entirely on pre-cut bags. Once the seal is made, a sliding blade trims excess material to approximately a quarter inch from the seal, completing the seal and cut in a single step without needing a separate tool or station.
The machine can also be adjusted to a 45-degree angle. This is particularly useful when sealing bags that contain liquids, powders, or other free-flowing contents that can shift during handling. Tilting the sealer helps keep the fill settled away from the seal area, which supports cleaner seals and reduces product waste.
The 450mm foot sealer 5mm seal cutter is used across food production, light manufacturing, retail, and trade supply wherever products need to be sealed into pre-formed tube bags or where material is fed from a roll and cut to length on the machine. The 45-degree tilt function makes it a practical option for businesses packing grains, powders, or liquids, as it keeps fill material away from the seal zone during the sealing cycle. The foot pedal operation suits any workstation where the operator needs both hands free to handle a filled or partially filled bag.
This machine is a practical fit for small to medium businesses that need a dependable foot-operated sealer without the complexity or cost of fully automated equipment. The built-in cutter keeps the packing bench tidy by completing the seal and trim in one step, and the foot-operated design integrates easily into an existing packing station. Because the 450mm foot sealer 5mm seal cutter uses impulse heat rather than constant heat, it is also well suited to environments where the machine sits idle between production runs, since the element only draws power during the sealing cycle itself.
If your operation involves heavier-duty materials or requires a wider sealing capacity, the Pacmasta Constant Heat Sealer - Foot Operated 600mm x 10mm Seal is worth reviewing as an alternative.
The 450mm foot sealer 5mm seal cutter from Pacmasta is a hands-free impulse sealing machine designed for businesses that need clean, repeatable seals on plastic tube bags. With a 450mm sealing width and a foot-operated pedal that keeps both hands free during the sealing cycle, this unit is built for higher-volume packing environments where consistency and workflow efficiency matter.
This machine uses impulse heat technology, meaning the heating element activates only when the sealing cycle is triggered rather than staying on continuously. This reduces energy use and lowers the risk of accidental burns when the machine is idle between batches. The operator triggers each sealing cycle with a foot pedal, leaving both hands free to hold, position, and steady the bag or product throughout the process.
The unit features an obstruction-free throat that allows roll-dispensed material to feed through cleanly without catching or bunching. This makes it suitable for operations working directly from a roll of flat or tube plastic film, rather than relying entirely on pre-cut bags. Once the seal is made, a sliding blade trims excess material to approximately a quarter inch from the seal, completing the seal and cut in a single step without needing a separate tool or station.
The machine can also be adjusted to a 45-degree angle. This is particularly useful when sealing bags that contain liquids, powders, or other free-flowing contents that can shift during handling. Tilting the sealer helps keep the fill settled away from the seal area, which supports cleaner seals and reduces product waste.
The 450mm foot sealer 5mm seal cutter is used across food production, light manufacturing, retail, and trade supply wherever products need to be sealed into pre-formed tube bags or where material is fed from a roll and cut to length on the machine. The 45-degree tilt function makes it a practical option for businesses packing grains, powders, or liquids, as it keeps fill material away from the seal zone during the sealing cycle. The foot pedal operation suits any workstation where the operator needs both hands free to handle a filled or partially filled bag.
This machine is a practical fit for small to medium businesses that need a dependable foot-operated sealer without the complexity or cost of fully automated equipment. The built-in cutter keeps the packing bench tidy by completing the seal and trim in one step, and the foot-operated design integrates easily into an existing packing station. Because the 450mm foot sealer 5mm seal cutter uses impulse heat rather than constant heat, it is also well suited to environments where the machine sits idle between production runs, since the element only draws power during the sealing cycle itself.
If your operation involves heavier-duty materials or requires a wider sealing capacity, the Pacmasta Constant Heat Sealer - Foot Operated 600mm x 10mm Seal is worth reviewing as an alternative.
Note: All products exclude GST where applicable at the current rate.
PLASQUIP has teamed up with a highly experienced Finance Consultant, Christos Kritikos from FINLEASE, to be able to offer our highly valued customers quick and efficient access to Equipment Finance for their purchase of Capital Plant and Equipment.
Ask Christos TODAY how to secure hassle-free finance for your equipment purchase – he can be contacted on his email below:
Landline: (02) 8404 2000
Mobile: 0448 005 890
Email: CKritikos@finlease.com.au
OR you can ask for Christos in the “comments” area in the FINLEASE Contact us page.
Delivery:
It is your obligation to enter the correct delivery address details at time of ordering. If you enter the wrong address, we are not obliged to re-send the order to the correct address at our expense. It is the responsibility of you the customer to inform us if an order does not arrive in a timely manner allowing for freight carriers normal delivery time frames to your address. All orders for product that is in stock is dispatched within two working days. If an order does not arrive please inform us. Once we learn an order has not arrived within the approximate delivery time frame, we will lodge enquiries with the freight provider to search for the order. We will not be held liable for any loss or damage resulting from late delivery, but will seek compensation on your behalf, for orders which do not arrive at all.
Without limiting the operation of any other Terms and Conditions herein, you agree that late delivery by a freight provider or Plasquip Sales does not constitute a failure of our agreement and does not entitle you to cancellation of an order.
Cancellations:
If you contact us before the order is shipped, we can refund you immediately. However, if the order has already been shipped, you will have to return the consignment to us at the below address. We (Plasquip Sales) reserve the right to cancel any order for any reason whatsoever. If you have already paid for an item ordered and we choose to cancel, your money will be refunded in full.
Refunds:
If you receive a product that you believe is significantly not as described, please contact us. After discussing the issue with us we will at our discretion refund your money after the return of the product/s. It will be your responsibility to return the item/s back to our address (at your cost, unless we are at, and have acknowledged, fault) in their original condition before a refund will be issued. Any item that we intentionally sell damaged, will be clearly marked as such.
Out of Stock:
Although we keep stock quantities of most products, on some occasions we run out of some products, which on average will delay an order, if this is the case, we will inform you via email of the estimated delivery time and give you the option to proceed with the order or cancel the order and receive a full refund.
Use our finance calculator from QPF Finance and Insurance to explore flexible payment options that work for you.
Procuret offers no-doc instant quote payment plan style financing for Plasquip products. Click the link below to decide the term 6 to 36 months you would like to pay over and receive an instant quote. Full application takes 2 minutes, approval within 15 minutes.
Please Note: In the 'Invoice ID' Field, Please Input 'Quote'
If you have any questions reach out to the customer success team:02 8866 5399/hello@procuret.com
Note: All products exclude GST where applicable at the current rate.