The combination strap dispenser MDHB from Pacmasta is a floor-standing, multi-core dispensing unit designed to handle woven, composite, and polypropylene (PP) strapping from a single platform. Where most dispensers are fixed to one core size, the MDHB accepts four different core diameters, making it a practical choice for any operation that works with more than one strapping type or switches between coil sizes during a shift.
The MDHB is built around versatility. The following specifications and features are confirmed for this unit:
The "combination" designation refers specifically to the MDHB's ability to accept multiple core diameters rather than being fixed to a single size. This is the key distinction that separates it from single-core dispenser units and means teams no longer need a separate dispenser for each coil type kept on hand.
A strap dispenser holds a coil in a controlled, stable position so the operator can draw strapping off smoothly and consistently. Without a dispenser, coils can unravel, tangle, or shift underfoot, slowing down the line and creating material waste. The MDHB addresses this by providing a fixed platform that keeps the coil seated correctly regardless of which of the four supported core sizes is loaded. The operator loads the coil onto the dispenser, threads the strap through to a hand tensioner or sealing tool, and draws off the required length with minimal resistance.
The combination strap dispenser MDHB suits a broad range of industrial and warehousing environments, including pallet strapping operations, timber yards, manufacturing facilities, and distribution centres where woven or composite strapping is applied manually or with a hand tensioner. Sites that handle mixed coil sizes across a single shift - for example, switching between a woven strap on heavy pallets and a composite strap on lighter or irregularly shaped loads - gain the most from having a single dispenser capable of accommodating all four core sizes. The MDHB fits equally well in a high-throughput packing line or a lower-volume despatch area where flexibility across strap types matters more than a fixed, dedicated setup.
The combination strap dispenser MDHB is intended to be used alongside tensioners and seals from the Pacmasta range. Once the strap is drawn off the dispenser, it is tensioned using an appropriate hand tool before being secured with a seal or buckle. The Heavy Duty Tensioner 19-35mm for Composite & Woven (Pacmasta TST-30HD) is one option worth considering for manual tensioning of woven and composite strapping. Choosing the correct tensioner for your strap width and type is important for achieving consistent, secure loads. If your operation uses a single coil type rather than mixed sizes, a dedicated single-core unit may suit your needs instead. All prices include GST where applicable at the current rate.
The combination strap dispenser MDHB from Pacmasta is a floor-standing, multi-core dispensing unit designed to handle woven, composite, and polypropylene (PP) strapping from a single platform. Where most dispensers are fixed to one core size, the MDHB accepts four different core diameters, making it a practical choice for any operation that works with more than one strapping type or switches between coil sizes during a shift.
The MDHB is built around versatility. The following specifications and features are confirmed for this unit:
The "combination" designation refers specifically to the MDHB's ability to accept multiple core diameters rather than being fixed to a single size. This is the key distinction that separates it from single-core dispenser units and means teams no longer need a separate dispenser for each coil type kept on hand.
A strap dispenser holds a coil in a controlled, stable position so the operator can draw strapping off smoothly and consistently. Without a dispenser, coils can unravel, tangle, or shift underfoot, slowing down the line and creating material waste. The MDHB addresses this by providing a fixed platform that keeps the coil seated correctly regardless of which of the four supported core sizes is loaded. The operator loads the coil onto the dispenser, threads the strap through to a hand tensioner or sealing tool, and draws off the required length with minimal resistance.
The combination strap dispenser MDHB suits a broad range of industrial and warehousing environments, including pallet strapping operations, timber yards, manufacturing facilities, and distribution centres where woven or composite strapping is applied manually or with a hand tensioner. Sites that handle mixed coil sizes across a single shift - for example, switching between a woven strap on heavy pallets and a composite strap on lighter or irregularly shaped loads - gain the most from having a single dispenser capable of accommodating all four core sizes. The MDHB fits equally well in a high-throughput packing line or a lower-volume despatch area where flexibility across strap types matters more than a fixed, dedicated setup.
The combination strap dispenser MDHB is intended to be used alongside tensioners and seals from the Pacmasta range. Once the strap is drawn off the dispenser, it is tensioned using an appropriate hand tool before being secured with a seal or buckle. The Heavy Duty Tensioner 19-35mm for Composite & Woven (Pacmasta TST-30HD) is one option worth considering for manual tensioning of woven and composite strapping. Choosing the correct tensioner for your strap width and type is important for achieving consistent, secure loads. If your operation uses a single coil type rather than mixed sizes, a dedicated single-core unit may suit your needs instead. All prices include GST where applicable at the current rate.
Note: All products exclude GST where applicable at the current rate.
PLASQUIP has teamed up with a highly experienced Finance Consultant, Christos Kritikos from FINLEASE, to be able to offer our highly valued customers quick and efficient access to Equipment Finance for their purchase of Capital Plant and Equipment.
Ask Christos TODAY how to secure hassle-free finance for your equipment purchase – he can be contacted on his email below:
Landline: (02) 8404 2000
Mobile: 0448 005 890
Email: CKritikos@finlease.com.au
OR you can ask for Christos in the “comments” area in the FINLEASE Contact us page.
Delivery:
It is your obligation to enter the correct delivery address details at time of ordering. If you enter the wrong address, we are not obliged to re-send the order to the correct address at our expense. It is the responsibility of you the customer to inform us if an order does not arrive in a timely manner allowing for freight carriers normal delivery time frames to your address. All orders for product that is in stock is dispatched within two working days. If an order does not arrive please inform us. Once we learn an order has not arrived within the approximate delivery time frame, we will lodge enquiries with the freight provider to search for the order. We will not be held liable for any loss or damage resulting from late delivery, but will seek compensation on your behalf, for orders which do not arrive at all.
Without limiting the operation of any other Terms and Conditions herein, you agree that late delivery by a freight provider or Plasquip Sales does not constitute a failure of our agreement and does not entitle you to cancellation of an order.
Cancellations:
If you contact us before the order is shipped, we can refund you immediately. However, if the order has already been shipped, you will have to return the consignment to us at the below address. We (Plasquip Sales) reserve the right to cancel any order for any reason whatsoever. If you have already paid for an item ordered and we choose to cancel, your money will be refunded in full.
Refunds:
If you receive a product that you believe is significantly not as described, please contact us. After discussing the issue with us we will at our discretion refund your money after the return of the product/s. It will be your responsibility to return the item/s back to our address (at your cost, unless we are at, and have acknowledged, fault) in their original condition before a refund will be issued. Any item that we intentionally sell damaged, will be clearly marked as such.
Out of Stock:
Although we keep stock quantities of most products, on some occasions we run out of some products, which on average will delay an order, if this is the case, we will inform you via email of the estimated delivery time and give you the option to proceed with the order or cancel the order and receive a full refund.
Use our finance calculator from QPF Finance and Insurance to explore flexible payment options that work for you.
Procuret offers no-doc instant quote payment plan style financing for Plasquip products. Click the link below to decide the term 6 to 36 months you would like to pay over and receive an instant quote. Full application takes 2 minutes, approval within 15 minutes.
Please Note: In the 'Invoice ID' Field, Please Input 'Quote'
If you have any questions reach out to the customer success team:02 8866 5399/hello@procuret.com
Note: All products exclude GST where applicable at the current rate.