The teflon cloth PS-450FI AI 46mm is a dedicated replacement component for the PS-450FI and PS-450AI impulse heat sealers, sized at 46 × 30mm to fit the sealing jaw area without trimming or modification. It provides the non-stick, heat-resistant barrier that sits between the heating element and the bag film during every seal cycle, and is sourced specifically for the PS-450FI/AI range.
Each teflon cloth PS-450FI AI 46mm is manufactured from PTFE (polytetrafluoroethylene) fabric and dimensioned precisely for the PS-450FI and PS-450AI models. The features below reflect what this component delivers in regular service.
In any impulse sealer, the teflon cloth sits directly between the hot element and the bag film during every seal cycle, making it one of the highest-wear consumable components in normal operation. Over time, the cloth can become discoloured, develop surface cracks, or begin to cause the bag film to adhere to the element. Once adhesion problems or uneven heat distribution appear, the cloth should be replaced promptly. Allowing a worn cloth to remain in service risks secondary damage to the heating element itself, which represents a more involved and costly repair. The teflon cloth PS-450FI AI 46mm is often replaced at the same time as the heating element and element tape as part of a standard service interval, and is available individually so operators can replace only this component when it is the only part showing wear.
This teflon cloth suits any production or packaging environment where a PS-450FI or PS-450AI impulse sealer is in regular use. Typical industries include food packaging, medical supply packaging, retail bagging operations, and general warehousing or despatch environments where polythene or laminate bags are sealed in volume. Because it is available individually, there is no need to purchase a full repair kit when only the cloth requires attention.
If your sealer requires a broader service rather than a single component replacement, the Repair Kit for PS-450FC Sealer is available for a closely related model in the PS-450 range and bundles the key consumable components needed to restore sealer performance in a single purchase. For the PS-450FI/AI specifically, the teflon cloth PS-450FI AI 46mm can be ordered on its own so you replace only what is needed and keep downtime to a minimum.
The teflon cloth PS-450FI AI 46mm is a dedicated replacement component for the PS-450FI and PS-450AI impulse heat sealers, sized at 46 × 30mm to fit the sealing jaw area without trimming or modification. It provides the non-stick, heat-resistant barrier that sits between the heating element and the bag film during every seal cycle, and is sourced specifically for the PS-450FI/AI range.
Each teflon cloth PS-450FI AI 46mm is manufactured from PTFE (polytetrafluoroethylene) fabric and dimensioned precisely for the PS-450FI and PS-450AI models. The features below reflect what this component delivers in regular service.
In any impulse sealer, the teflon cloth sits directly between the hot element and the bag film during every seal cycle, making it one of the highest-wear consumable components in normal operation. Over time, the cloth can become discoloured, develop surface cracks, or begin to cause the bag film to adhere to the element. Once adhesion problems or uneven heat distribution appear, the cloth should be replaced promptly. Allowing a worn cloth to remain in service risks secondary damage to the heating element itself, which represents a more involved and costly repair. The teflon cloth PS-450FI AI 46mm is often replaced at the same time as the heating element and element tape as part of a standard service interval, and is available individually so operators can replace only this component when it is the only part showing wear.
This teflon cloth suits any production or packaging environment where a PS-450FI or PS-450AI impulse sealer is in regular use. Typical industries include food packaging, medical supply packaging, retail bagging operations, and general warehousing or despatch environments where polythene or laminate bags are sealed in volume. Because it is available individually, there is no need to purchase a full repair kit when only the cloth requires attention.
If your sealer requires a broader service rather than a single component replacement, the Repair Kit for PS-450FC Sealer is available for a closely related model in the PS-450 range and bundles the key consumable components needed to restore sealer performance in a single purchase. For the PS-450FI/AI specifically, the teflon cloth PS-450FI AI 46mm can be ordered on its own so you replace only what is needed and keep downtime to a minimum.
Note: All products exclude GST where applicable at the current rate.
PLASQUIP has teamed up with a highly experienced Finance Consultant, Christos Kritikos from FINLEASE, to be able to offer our highly valued customers quick and efficient access to Equipment Finance for their purchase of Capital Plant and Equipment.
Ask Christos TODAY how to secure hassle-free finance for your equipment purchase – he can be contacted on his email below:
Landline: (02) 8404 2000
Mobile: 0448 005 890
Email: CKritikos@finlease.com.au
OR you can ask for Christos in the “comments” area in the FINLEASE Contact us page.
Delivery:
It is your obligation to enter the correct delivery address details at time of ordering. If you enter the wrong address, we are not obliged to re-send the order to the correct address at our expense. It is the responsibility of you the customer to inform us if an order does not arrive in a timely manner allowing for freight carriers normal delivery time frames to your address. All orders for product that is in stock is dispatched within two working days. If an order does not arrive please inform us. Once we learn an order has not arrived within the approximate delivery time frame, we will lodge enquiries with the freight provider to search for the order. We will not be held liable for any loss or damage resulting from late delivery, but will seek compensation on your behalf, for orders which do not arrive at all.
Without limiting the operation of any other Terms and Conditions herein, you agree that late delivery by a freight provider or Plasquip Sales does not constitute a failure of our agreement and does not entitle you to cancellation of an order.
Cancellations:
If you contact us before the order is shipped, we can refund you immediately. However, if the order has already been shipped, you will have to return the consignment to us at the below address. We (Plasquip Sales) reserve the right to cancel any order for any reason whatsoever. If you have already paid for an item ordered and we choose to cancel, your money will be refunded in full.
Refunds:
If you receive a product that you believe is significantly not as described, please contact us. After discussing the issue with us we will at our discretion refund your money after the return of the product/s. It will be your responsibility to return the item/s back to our address (at your cost, unless we are at, and have acknowledged, fault) in their original condition before a refund will be issued. Any item that we intentionally sell damaged, will be clearly marked as such.
Out of Stock:
Although we keep stock quantities of most products, on some occasions we run out of some products, which on average will delay an order, if this is the case, we will inform you via email of the estimated delivery time and give you the option to proceed with the order or cancel the order and receive a full refund.
Use our finance calculator from QPF Finance and Insurance to explore flexible payment options that work for you.
Procuret offers no-doc instant quote payment plan style financing for Plasquip products. Click the link below to decide the term 6 to 36 months you would like to pay over and receive an instant quote. Full application takes 2 minutes, approval within 15 minutes.
Please Note: In the 'Invoice ID' Field, Please Input 'Quote'
If you have any questions reach out to the customer success team:02 8866 5399/hello@procuret.com
Note: All products exclude GST where applicable at the current rate.