The Or-1000 Or-2000 photocell eye black replacement is a genuine spare part designed to restore correct sensor operation on Orbitwrap turntable wrapping machines. When the photocell eye fails or is damaged during normal packing operations, the wrapping cycle cannot complete reliably - pallets may be left partially wrapped or the machine may halt mid-sequence. Replacing the unit with the correct genuine part gets your line running again with minimal disruption.
The following specifications apply to this genuine Or-1000 Or-2000 photocell eye black sensor. Before ordering, check the model plate on the mast or turntable base to confirm which mast height configuration your machine is fitted with, then select the appropriate variant.
The photocell eye detects load presence on the turntable and triggers the wrap sequence at the correct point in the cycle. Without a functioning sensor, the machine has no reliable way to confirm that a pallet is positioned and ready, which means the wrap sequence either fails to start or stops before completion. This Or-1000 Or-2000 photocell eye black unit is the direct replacement for the original component, so no modifications are required during installation.
The sensor is a component that can be vulnerable to incidental forklift contact, stretch film fouling, or general wear over time. Keeping a spare on hand means maintenance staff can swap the unit promptly rather than waiting on parts sourcing, reducing unplanned downtime on the packing floor.
This Or-1000 Or-2000 photocell eye black replacement suits any operation running an Or-1000 or Or-2000 Orbitwrap turntable wrapper as part of an end-of-line pallet wrapping setup. Warehouses, distribution centres, food and beverage facilities, and light manufacturing sites that depend on these machines for consistent pallet wrapping will benefit from keeping a genuine spare photocell unit on hand. Because the Or-1000 and Or-2000 are widely used across these environments, sourcing the correct replacement part through a single supplier simplifies procurement and helps ensure component compatibility across your wrapping line.
If you operate an Or-1000 or Or-2000 and are looking to expand the capability of your wrapping line, the Or-1000/2000 Platform Scale - 3000kg is a compatible accessory available from the same range. Sourcing genuine Orbitwrap parts and accessories together helps confirm compatibility and reduces the number of suppliers your team needs to manage.
The Or-1000 Or-2000 photocell eye black replacement is a genuine spare part designed to restore correct sensor operation on Orbitwrap turntable wrapping machines. When the photocell eye fails or is damaged during normal packing operations, the wrapping cycle cannot complete reliably - pallets may be left partially wrapped or the machine may halt mid-sequence. Replacing the unit with the correct genuine part gets your line running again with minimal disruption.
The following specifications apply to this genuine Or-1000 Or-2000 photocell eye black sensor. Before ordering, check the model plate on the mast or turntable base to confirm which mast height configuration your machine is fitted with, then select the appropriate variant.
The photocell eye detects load presence on the turntable and triggers the wrap sequence at the correct point in the cycle. Without a functioning sensor, the machine has no reliable way to confirm that a pallet is positioned and ready, which means the wrap sequence either fails to start or stops before completion. This Or-1000 Or-2000 photocell eye black unit is the direct replacement for the original component, so no modifications are required during installation.
The sensor is a component that can be vulnerable to incidental forklift contact, stretch film fouling, or general wear over time. Keeping a spare on hand means maintenance staff can swap the unit promptly rather than waiting on parts sourcing, reducing unplanned downtime on the packing floor.
This Or-1000 Or-2000 photocell eye black replacement suits any operation running an Or-1000 or Or-2000 Orbitwrap turntable wrapper as part of an end-of-line pallet wrapping setup. Warehouses, distribution centres, food and beverage facilities, and light manufacturing sites that depend on these machines for consistent pallet wrapping will benefit from keeping a genuine spare photocell unit on hand. Because the Or-1000 and Or-2000 are widely used across these environments, sourcing the correct replacement part through a single supplier simplifies procurement and helps ensure component compatibility across your wrapping line.
If you operate an Or-1000 or Or-2000 and are looking to expand the capability of your wrapping line, the Or-1000/2000 Platform Scale - 3000kg is a compatible accessory available from the same range. Sourcing genuine Orbitwrap parts and accessories together helps confirm compatibility and reduces the number of suppliers your team needs to manage.
Note: All products exclude GST where applicable at the current rate.
PLASQUIP has teamed up with a highly experienced Finance Consultant, Christos Kritikos from FINLEASE, to be able to offer our highly valued customers quick and efficient access to Equipment Finance for their purchase of Capital Plant and Equipment.
Ask Christos TODAY how to secure hassle-free finance for your equipment purchase – he can be contacted on his email below:
Landline: (02) 8404 2000
Mobile: 0448 005 890
Email: CKritikos@finlease.com.au
OR you can ask for Christos in the “comments” area in the FINLEASE Contact us page.
Delivery:
It is your obligation to enter the correct delivery address details at time of ordering. If you enter the wrong address, we are not obliged to re-send the order to the correct address at our expense. It is the responsibility of you the customer to inform us if an order does not arrive in a timely manner allowing for freight carriers normal delivery time frames to your address. All orders for product that is in stock is dispatched within two working days. If an order does not arrive please inform us. Once we learn an order has not arrived within the approximate delivery time frame, we will lodge enquiries with the freight provider to search for the order. We will not be held liable for any loss or damage resulting from late delivery, but will seek compensation on your behalf, for orders which do not arrive at all.
Without limiting the operation of any other Terms and Conditions herein, you agree that late delivery by a freight provider or Plasquip Sales does not constitute a failure of our agreement and does not entitle you to cancellation of an order.
Cancellations:
If you contact us before the order is shipped, we can refund you immediately. However, if the order has already been shipped, you will have to return the consignment to us at the below address. We (Plasquip Sales) reserve the right to cancel any order for any reason whatsoever. If you have already paid for an item ordered and we choose to cancel, your money will be refunded in full.
Refunds:
If you receive a product that you believe is significantly not as described, please contact us. After discussing the issue with us we will at our discretion refund your money after the return of the product/s. It will be your responsibility to return the item/s back to our address (at your cost, unless we are at, and have acknowledged, fault) in their original condition before a refund will be issued. Any item that we intentionally sell damaged, will be clearly marked as such.
Out of Stock:
Although we keep stock quantities of most products, on some occasions we run out of some products, which on average will delay an order, if this is the case, we will inform you via email of the estimated delivery time and give you the option to proceed with the order or cancel the order and receive a full refund.
Use our finance calculator from QPF Finance and Insurance to explore flexible payment options that work for you.