SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
|
M100 |
|
| LASER SYSTEM | Type：fiber laser Wave Length：1064nm Power：200W (70W optional) |
| RECOATING SYSTEM | Process：scraper coating Layer Tickness: 0.02-0.1mm |
| OPTICAL & SCANNING | Beam (diameter@1/e2)：≤0.04mm Scanning Galvanometer：ScanLab Scanning Speed: up to 7m/s Building Speed：2-20cm³/h |
| ELEVATOR | Drive Mode：servo motor precision reduction drive Printing Board Bearing Weight ：≥200kg Repositioning Accuracy: ±0.005 mm |
| BUILD VAT | Volume：Approx. 2L Size：100mm (X)*100mm (Y)*100mm (Z) Heat: Precision resistance wire heating Protectivegas：N2 / Argon Materials： Stainless Steel / Die Steel / Titanium Alloy / Aluminum Alloy / Co-Cr Alloy / Nickel Alloy / Copper / Precious Metal etc |
| SOFTWARE | Control Software：Bulltech Date Preparation Software：Materialise Magics Data Interface：STL or other convertible format |
| WORKING CONDITION | Power：220V 50/60Hz, 32 Amps, single phase Ambient Temperature：15-36ºC Relative Humidity：≤ 65% Dimension: 1200m(L)*800mm(W)*1700mm(H) |
Parts with high quality surface before polishing Parts in high accuracy, for precision samples Directly produce functional metal parts, simplify the manufacture process Parts have metallurgy and mechanical properties, density over than 99%. Especially for single part or small amount of functional parts Bus control system makes the machine faster Remote APP monitoring and Smart pushing information International high standard components, more stable and reliable Self developed and patented control and slicing software, easy to use and cost saving
SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
|
M100 |
|
| LASER SYSTEM | Type：fiber laser Wave Length：1064nm Power：200W (70W optional) |
| RECOATING SYSTEM | Process：scraper coating Layer Tickness: 0.02-0.1mm |
| OPTICAL & SCANNING | Beam (diameter@1/e2)：≤0.04mm Scanning Galvanometer：ScanLab Scanning Speed: up to 7m/s Building Speed：2-20cm³/h |
| ELEVATOR | Drive Mode：servo motor precision reduction drive Printing Board Bearing Weight ：≥200kg Repositioning Accuracy: ±0.005 mm |
| BUILD VAT | Volume：Approx. 2L Size：100mm (X)*100mm (Y)*100mm (Z) Heat: Precision resistance wire heating Protectivegas：N2 / Argon Materials： Stainless Steel / Die Steel / Titanium Alloy / Aluminum Alloy / Co-Cr Alloy / Nickel Alloy / Copper / Precious Metal etc |
| SOFTWARE | Control Software：Bulltech Date Preparation Software：Materialise Magics Data Interface：STL or other convertible format |
| WORKING CONDITION | Power：220V 50/60Hz, 32 Amps, single phase Ambient Temperature：15-36ºC Relative Humidity：≤ 65% Dimension: 1200m(L)*800mm(W)*1700mm(H) |
Parts with high quality surface before polishing Parts in high accuracy, for precision samples Directly produce functional metal parts, simplify the manufacture process Parts have metallurgy and mechanical properties, density over than 99%. Especially for single part or small amount of functional parts Bus control system makes the machine faster Remote APP monitoring and Smart pushing information International high standard components, more stable and reliable Self developed and patented control and slicing software, easy to use and cost savingNote: All products exclude GST where applicable at the current rate.
PLASQUIP has teamed up with a highly experienced Finance Consultant, Christos Kritikos from FINLEASE, to be able to offer our highly valued customers quick and efficient access to Equipment Finance for their purchase of Capital Plant and Equipment.
Ask Christos TODAY how to secure hassle-free finance for your equipment purchase – he can be contacted on his email below:
Landline: (02) 8404 2000
Mobile: 0448 005 890
Email: CKritikos@finlease.com.au
OR you can ask for Christos in the “comments” area in the FINLEASE Contact us page.
Delivery:
It is your obligation to enter the correct delivery address details at time of ordering. If you enter the wrong address, we are not obliged to re-send the order to the correct address at our expense. It is the responsibility of you the customer to inform us if an order does not arrive in a timely manner allowing for freight carriers normal delivery time frames to your address. All orders for product that is in stock is dispatched within two working days. If an order does not arrive please inform us. Once we learn an order has not arrived within the approximate delivery time frame, we will lodge enquiries with the freight provider to search for the order. We will not be held liable for any loss or damage resulting from late delivery, but will seek compensation on your behalf, for orders which do not arrive at all.
Without limiting the operation of any other Terms and Conditions herein, you agree that late delivery by a freight provider or Plasquip Sales does not constitute a failure of our agreement and does not entitle you to cancellation of an order.
Cancellations:
If you contact us before the order is shipped, we can refund you immediately. However, if the order has already been shipped, you will have to return the consignment to us at the below address. We (Plasquip Sales) reserve the right to cancel any order for any reason whatsoever. If you have already paid for an item ordered and we choose to cancel, your money will be refunded in full.
Refunds:
If you receive a product that you believe is significantly not as described, please contact us. After discussing the issue with us we will at our discretion refund your money after the return of the product/s. It will be your responsibility to return the item/s back to our address (at your cost, unless we are at, and have acknowledged, fault) in their original condition before a refund will be issued. Any item that we intentionally sell damaged, will be clearly marked as such.
Out of Stock:
Although we keep stock quantities of most products, on some occasions we run out of some products, which on average will delay an order, if this is the case, we will inform you via email of the estimated delivery time and give you the option to proceed with the order or cancel the order and receive a full refund.
